WILD SHEEP AND PRONGHORN ANTELOPE INSTRUCTIONS
NOTE: THE RACKULATOR ALWAYS STARTS ON THE RIGHT SIDE.
To measure the horns of one of these animals, the longest horn is divided into quarters. This is then used for both sides. To do this, press the STEP button until “Extra” shows on the screen. Roll the wheel, or use the tape to find the longest horn. Using that figure, press the Divide 2 button twice; this will give you your quarter measurements. Now mark the base measurement. Clear the Rackulator. Measure to the next quarter mark. Do the same for the next two-quarter measurements. Clear the Rackulator. Advance to CIRC-1 by pressing the STEP button, and take the CIRC-1 measurement. Press the SUB button. This will enter CIRC-1, and CIRC-2 will appear, repeat until CIRC-3 and CIRC-4 are completed. Now press the STEP button, BEAM will show. Measure the length of the horn. If you are scoring a sheep, press the STEP button until you advance to the left side. Repeat all measurements on the left side and press STEP, Tine-1 will show. Now take the measurement of the prong. Press STEP. Advance to the left side. Repeat until completed. Press SCORE.